Polytec OFV-3001, User Manual

Page: 22 / 101

3-10
3 First Steps
5
Fiber optic cable
6
Mini sensor (Diameter 10 mm)
The mini sensor contains a lens to focus the laser beam. Exchange of the
mini sensor with a fiber head is described in
section B.3 .
The back panel of the sensor head OFV-511 is shown in figure 3.6 .
7
Transport handle
8
Sensor mount
To transport the sensor head, the mini sensor can be plugged into this
sensor mount.
9
SIGNAL PROCESSOR - connector (Sub-D jack)
Jack for the connecting cable to the controller
10
Transport safety mechanism
The transport safety mechanism is (de)activated by turning the screw with
the Allen key provided (refer to
section 5.8 ).
Note !
Each mini sensor is exactly adjusted to its fiber. Never exchange the mini sensor with a mini
sensor of another sensor head !
Figure 3.6: Rear view of the sensor head OFV-511
S I G N A L
P R O C E S S O R
A C H T U N G !
B i t t e v o r d e m T r a n s p o r t
d i e T r a n s p o r t s i c h e r u n g b e t ä t i g e n
C A U T I O N !
P l e a s e s e c u r e t r a n s p o r t m e c h a n i s m
b e f o r e s h i p m e n t
M E A S U R E M E N T T R A N S P O R T
1 2
4 3
Caution !
Always activate the transport safety mechanism before moving the sensor head !