Polysoude P6 HW, Operating, Maintenance And Programming Manual, Page: 55 / 100

THE ART OF WELDING
P6 HW
PN-0110008 Rev. 12 55-100
Examples of displayed messages during a weld cycle:
W P : 0 0 1 I N 1 7 0 x 1 5
P R G : < 0 3 A B C D E F G >
S 0 5 T 0 0 1 5 s 0 1 2 4 i
* ! * 1 2 . 3 V 1 5 0 . 0 A
V 3 2 = 0 1 2 5 m m / m i n
S 0 5 T 0 0 1 5 s 0 1 2 4 i
* ! * 1 2 . 3 V 1 5 0 . 0 A
I 2 2 = 1 1 2 A
S 0 5 T 0 0 1 5 s 0 1 2 4 i
* ! * 1 2 . 3 V 1 5 0 . 0 A
W P : 0 0 1 I N 1 7 0 x 1 5
P R G : < 0 3 A B C D E F G >
S 0 5 T 0 0 5 5 s 0 3 6 0 i
C y c l e e n d
The display during a cycle shows:
on the fi rst two rows, the WP •
and the current program,
on the third row, the number of •
the current sector, elapsed time
and the movement pulses,
on the fourth row, 2 stars (1Hz) •
encircling an exclamation mark,
the arc voltage and welding cur-
rent ( I22 ).
Changing a speed override erases
the fi rst two rows and displays the
new values sent. After 5 seconds,
the standard display shown during a
cycle reappears.
Changing a current override erases
the fi rst two rows and displays the
new values sent. After 5 seconds,
the standard display shown during a
cycle reappears.
A stop or slope down caused during
a cycle displays the corresponding
message.