Polysoude P6 HW, Operating, Maintenance And Programming Manual, Page: 29 / 100

THE ART OF WELDING
P6 HW
PN-0110008 Rev. 12 29-100
PC/Power source connection 4. 2. 7.
If a PC is used you must use the RJ45 cable supplied with the pow-
er source. Failure to use this cable may result in hazards for the user.
Polysoude declines to accept any liability unless the PC/Power source
connection is made with the RJ45 cable.
Connect the PC to the RJ45 connector situated at the front of the power source with the Ethernet cable supplied
.
The default IP address of the power source is
172.16.200.20
Confi guring the power source’s IP address:
Press the button BT 6 “I-” of the remote control pendant during several seconds.
On the display of the remote control pendant appears:
> I P A d r e s s
T a c h o
Select “IP Adress” with the button BT 1 .
Con fi rm the selection with the button BT 3 “N+”.
On the display of the remote control pendant appears Ip number
The IP address is in the form of four numeric blocks that can be modi fi ed by BT2 and BT3 . Moving from one
block to another is effected by a pulse on BT1.
Once you have reached the last block, pressing once more on BT1 stores the new entry in memory and termi-
nates the IP address modi fi cation procedure.
Confi guring the IP address in Windows™ 2000, XP or NT:
In order to modify the IP address of the PC.
In the Start menu, select Settings > Network Connections .
The list of connections appears. Right click Local network connection then click on Properties . The General
tab contains all of the elements used for the connection.
Double click on Internet protocol ( TCP/IP ), and tick the option “Use the following IP address” and enter the
address of the power source.