Polysoude P6 HW, Operating, Maintenance And Programming Manual, Page: 5 / 100

THE ART OF WELDING
P6 HW
PN-0110008 Rev. 12 5-100
Safety instructions 1.
Warning: Protect yourself and others from injury − Read and follow these precautions.
Hazards associated with arc welding 1. 1.
The symbols reproduced below are used throughout this Technical Manual in order to draw your
attention and identify the potential hazards. When you see one of these symbols, refer to the safety instruc-
tions in the following section ‘Recommendations’.
This equipment must only be installed, used, maintained and repaired by quali fi ed persons.
While it is in use, anyone not working with the equipment must be kept well away.
Meaning of the symbols 1. 2.
Risk of electric shocks.
Risk of serious injury caused
by rotating parts.
Risk of inhaling fumes or
gases.
Risk of explosion.
Risk of burns to the eyes or
the skin due to heat radiation.
Risk of exposure to magnet-
ic fi elds.
Warning: hot surfaces – Risk
of burns.
Danger caused by noise.
Risk of burns to the eyes or
the skin due to fl ying sparks.
Read the instructions.
Risk of excessive heat or fi re.
Safety goggles must be
worn.
Safety boots must be worn.
Safety helmets must be
worn.
Fall hazard.
Refer to the recommenda-
tions below in order to take
the necessary precautions
to avoid any hazard.