Figure 12
3032
Figure 13
2-2-9 Connecting the Power Cord
（
（
（
（
Fig.12, 13
and 14
）
）
）
）
★
★
★
★
Do not place stress or strain on the power
cord. These will damage the cord and cause
a danger to the user.
1.
Turn the main switch
①
to “O” (off) before
connecting the power cord.
2.
Insert the power cord plug
②
into the electrical
connector
③
.
3.
Insert the power cord
④
into an electrical
receptacle (5).
4.
Insert the BNC connector plug
⑨
into the BNC
connector jack
⑧
.
★
★
★
★
Ensure the power cord is connected to a
grounded receptacle.
Use of an electrical surge suppressor receptacle
is highly recommended.
2-2-10 Replacing the Fuse (Figures 12 & 13
）
）
）
）
Turn the main switch
①
to “O” (off) before
replacing the fuse. Unplug the power cord.
Rotate the fuse holder
⑥
out of the base
⑦
with a flat edge screwdriver, replace the fuse,
then insert the fuse holder and tighten.
★
Fuse rating: 250V
，
，
，
，
500mA.
6
Figure 14
3
2
7
6
8
9
4
5
1
