background image

A.  

keep all station equipment in good, 

clean working condition.

B.  

Bluemaster® Station should only be 

serviced by approved qualified personnel.  

Please contact a local service agent for this.

C.  

Spare parts must comply with the 

requirements of the manufacturer.

D.  

A daily check should be carried out in 

the visual condition of the station, devices 

and power supply.

e.  

Any faults or alarms should be reported 

to the station supplier immediately. 

F.  

Protect against unauthorised access.

G.  

Bluemaster® Station should be serviced 

every 6 months or every 50,000 litres dis-

pensed, depending  on which occurs first.

H.  

Transport and store the station so as not 

to damage the tank walls.

K.  

Ensure no foreign material is entering 

the Bluemaster® Station at all times.

l.  

If the station has not been used for an 

extended period, run contents through 

the dispenser for at least 10 seconds and 

dispose of appropriately.

6   

 l

  

industrial.polymaster.com.au

This guarantee is not valid for the following 
defects:

• 

Mechanical damaged caused by the 
user, dealer or improper maintenance.

• 

Faults, damage or premature wear 
caused by improper use.

• 

Damage caused by third parties.

• 

Repairs carried out by unauthorised 
service personnel.

Within the warranty period, Polymaster will 
repair or replace, at their discretion, any tank 
found faulty due to incorrect material or 
workmanship.

Polymaster products are guaranteed against 
material or manufacturing defect and have 
the following guarantee period commencing 
from the date of the invoice:

• 

For polyethylene tanks: 5 year

• 

For accessories/components: 1 year

W

arranty

Service & Maintenance

Summary of Contents for AdBlue Bluemaster Series









Reviews: