background image

FREECALL 1300 062 064

   

 l      

Introduction

Safety Guide

Congratulations for purchasing one 
of Polymaster’s quality Bluemaster

®

       

Stations. ensure this product is cor-
rectly installed, operated and regularly 
maintained and it should give you    
trouble free service for year to come.
Correct tank installation is the sole 
responsibility of the purchaser.
The following content is a guide only. 
Any vehicle/machinery affected     
negatively or positively is not covered 
by the Bluemaster

®

 Station guarantee.

Bluemaster® Brief 

This 

Bluemaster® Station

 

 is only to be 

used for the static storage and dispensing of 
AdBlue. The range is designed and engi-
neered to suit the needs of a vast coverage 
of industrial, commercial and public require-
ments from nationwide fleets to local users.

The station enables safe chemical storage 
outdoors, at a safe distance from building 
and hazard zoned areas. High resistance 
against mechanical impact and protection 
against heat due to the bunding system 
(tank in tank) construction. The high 
standard that your Bluemaster Station has 
been made to ensure optimum safely and 
functionally.

N.B. For customised BMS’s the following material may 

not apply. For all customised bluemaster stations, 

polymaster takes no responsibility for operation, rec-

ommendations or maintenance and safety guidance.

READ OPERATION MANUAL IN DETAIL  
BEFORE USE &  COMPLy WITH ALL         
INSTRUCTIONS HEREIN.
OPERATION MANUAL SHOULD BE kEPT 
WITH THE EqUIPMENT AT ALL TIMES.

A.  

Installation and use of this product 

should only be carried out by properly 
trained and approved personnel.

B.  

This manual contains important informa-

tion concerning the safe installation and use 
of this product. Read the manual carefully 
before installation and use. Pay attention to 
all safety warnings.

C. 

Users of this product are responsible for 

the safe and correct use of this product.

D. 

Any changes to this product, which have 

been done without consulting the manu-
facturer, will invalidate all warranties and 
guarantees.

e. 

The manufacturer will not be responsible

for any accidents or damages caused by 
incorrect installation or use of this product.

F. 

This product is only suitable for storage 

and dispensing of Adblue® SCR urea.

G. 

The control board contains electrical 

devices which are not suited for use 

 in 

area’s where there may be risks of explosion.

H. 

The components must not be altered 

or tampered with due to potential risks to 
personnel.

Summary of Contents for AdBlue Bluemaster Series









Reviews: