FREECALL 1300 062 064
l
5
•
The guarantee excludes ancillary fittings
such as contents measuring gauges or
mechanical pumps.
Provided that the following criteria are ad-
hered to (applicable to all models):
•
The enclosed guarantee card is returned
to Polymaster with evidence of the
purchase date.
•
The tank is installed and commissioned
in accordance with the instructions out-
lined in the Installation and User Manual.
•
The tank is installed and commissioned
by a suitably qualified engineer.
•
The tank has not been subject to misuse,
careless handling, faulty installation, or
any repairs have not been attempted
or carried out other than by authorized,
qualified service staff.
•
The tank has been purchased by the
end user and is not for hire purposes.
•
The tank is installed above ground.
•
The tank is inspected every 6 months or
every 50,000 litres dispensed, depend-
ing on which occurs first, by a suitably
qualified service engineer. Immediately
upon discovery of any defect in the tank
steps are taken to mitigate loss by con-
tacting the Adblue supplier and if neces-
sary arrange for tank to be drained.
•
Immediately upon discovery of any
defect you contact the Guarantor and
allow a representative to inspect the
tank and its surroundings and where
necessary carry our any repairs (before
any attempts are made to move the
tank).
•
Standard and ancillary fittings, repairs
and maintenance are to be carried out
by your nominated agent
1. FIllInG BlueMASTer
®
TAnK
During the first fill of the tank the level
indicator may show less volume than that
filled. The level indicator minimum read point
is placed at the base of the tank. The safe fill
level must NOT be exceeded.
NOTE: As level gauges can take some time to
calibrate, the liquid level must be physically
checked during initial filling.
A.
Filling should be performed only under
constant supervision of an authorized person.
B.
This tank can only be filled by a tanker
equipped with a female dry-break coupling.
C.
Ensure dispensing nozzle is in the holster.
D.
Fit delivery hose to dry-break coupling. Do
not fill the internal tank by other means.
e.
Stop filling when desired amount has been
dispensed into tank or when overfill alarm
is activated.
F.
Disconnect delivery hose from coupling.
2. DISPenSInG FrOM BlueMASTer
®
STATIOnS.
A.
If the unit is a terminal station, please read
the MC Box manual entirely before use, and
ensure any users are fully instructed.
B.
Lift dispensing nozzle from holster.
Ensure the nozzle is clean.
C.
Turn the pump on and start pumping
immediately.
D.
Dispense contents into appropriate tank
e.
When vehicle is full, turn off pump
immediately, ensure the dispensing nozzle
is clean before placing back in holster.
