background image

4   

 l

  

industrial.polymaster.com.au

Transport & Storage

A.  

DO NOT TRANSPORT WITH LIqUID 

INSIDE.

B.  

The Bluemaster Station must be pro-

tected against mechanical damage during 
transport and storage.

C. 

Loading and off-loading must be carried 

out using only professional equipment, e.g. a  
forklift with extended forks. The covers, sock-
ets or other protruding elements, which are 
not designed for lifting or moving the station 
must not be used to lift or move the station.

D. 

The Bluemaster Station must never 

be pushed or rolled.

e. 

During transport and storage, the door 

must be tightly closed and secured. The dis-
pensing nozzle must be placed in its holster 
and the control box shut.

F. 

Loading and transport areas must be 

smooth and free of sharp edges. During 
transportation, the tank must be secured to 
prevent the tank from moving.

These instructions should be read in their 
entirety before commencing installation
of the Bluemaster Station.

• 

For all tank installation and maintenance, 
please take into consideration Health & 
Safety/Local Building Regulations.

• 

A concrete/level solid base is recom-
mended for installation. If this is not 
possible the station should be installed 

directly on a level, secure and non-com-
bustible base.

• 

Determine if station needs to be secured 
in place in exposed conditions. Do not 
drill holes in the tank. 

• 

Bluemaster tanks are supplied with an 
electronic contents gauge and alarms as 
standard.

• 

Prior to installing inspect for damage, if 
damaged do not install.

• 

The guarantee card in this booklet 
should be returned to the supplier at 

161 Karinie St, Swan Hill vic. 3585 or           
[email protected]

• 

The tank serial number must be record-
ed on the guarantee card to validate 
warranty. This number is usually located 
on outside tank by the access hole.

• 

THE STATION MUST NOT BE FILLED AT 
A RATE EXCEEDING 250 LITRES PER 
MINUTE.

• 

For further advice, contact the         
BlueMaster helpline on 

1300 062 064

After installation, please ensure that this 
instruction booklet is left with the end user 
for future reference.

Ensure the entire base of the tank is           
supported with a non-combustible base 
(minimum 45mm in thickness) extending 
300mm on all sides.

Bluemaster Station is guaranteed for 2 years 
from the date of purchase against faulty 
materials or manufacture of the tanks. The 
equipment and accessories are guaranteed 
for 1 year from purchase.

Installation & Handling

Summary of Contents for AdBlue Bluemaster Series









Reviews: