Polytel
®
GMA3
11-2520-2 October
2017
11
you change the batteries
1.
Open the battery compartment by sliding the lid (see
fi gure 2)
Figure 3: Batteries should go in like this
2. Insert the batteries as shown in Figure 3.
Note: Always replace both batteries at the same time and
make sure the batteries are from the same manufacturer.
3. Close the battery compartment by sliding it back into
place.
4. If the red light still fl ashes for 10 seconds or longer,
repeat steps 1 through 3 and:
•
Check that you inserted the batteries in the right
direction.
•
Try replacing with a different pair of AAA size
