Polytel
®
GMA3
11-2520-2 October
2017
15
send data.
When the devices are working together correctly, the light
on the GMA comes on right after you take a new reading,
then goes out when the reading is sent. See page 9 to
learn more about the indicator light.
3.4 Pairing
In keeping with the Bluetooth Glucose Meter standard,
before any readings can be sent the fi rst time, the GMA
must be paired with the phone.
To pair the GMA3, it needs to be made “pairable” by
pressing the button on the GMA three times. The red LED
will come on in addition to the blue LED. When, a few
seconds, later, both LEDs start blinking, the GMA is ready
for the phone to pair with it.
3.5 How to use your GMA
1.
Insert the glucose test strip into the glucose meter and
take your reading as you normally would. Instructions
on using your glucose meter should have come with
the original box.
2.
Remove the test strip as usual.
3.
After you remove the test strip:
•
The blue light on the GMA turns on automatically.
•
The meter will show activity:
•
LifeScan meters display PC on the screen. This
shows that it is sending the reading to the GMA. The
PC indication will stay on for two minutes. This is
