Polytel
®
GMA3
11-2520-2 October
2017
18
After taking your glucose reading, it may take a minute or
two to send the reading to the receiving station.
Please
be patient
—do not press any buttons or disconnect the
GMA until the light has completely stopped blinking or your
results may not be sent.
Figure 5:
Blinking
light usually
means your
information
is being sent.
Please be
patient.
IMPORTANT:
If glucose meter screen does
not show PC or the light does not come on
shortly after taking a new reading:
•
Check that the GMA cable is fi rmly plugged into the
glucose meter
•
Try replacing both batteries (see page 10).
•
See page 20 if you are still having problems.
When the GMA sends your information, the power level
of the batteries is sent along with your reading. Your
monitoring service may tell you it is time to replace the
