18
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
MST. Extended operating days and hours during peak season requirements.
1. If the pool is filled with water, unscrew the strainer grids from the strainer connector and insert the black hat like plugs into the connectors, before installing the salt
water system.
2. Unplug the power cord.
3. Detach inlet hose end
13
and outlet hose end
24
.
ELECTROLYTIC CELL REPLACEMENT
IMPORTANT:
ELECTROLYTIC CELL HAS A SELF CLEANING FUNCTION INCORPORATED INTO THE ELECTRONIC CONTROL PROGRAM. THE
SYSTEM AUTOMATICALLY CHECKS OPERATIONAL EFFICIENCY. IF THE SYSTEM INDICATES POOR CELL CONDITION CHECK FOR POOL WATER
QUALITY FIRST. IF "CELL STATUS" IS STILL ON, THEN REPLACE THE CELL.
13
24
5. Take out the old electrolytic cell set
21
and disconnect all connector cords.
21
25
26
4. Unscrew the cell cover nut
26
to open, and remove cell bottom case
25
.
