14
En caso de problemas, póngase en contacto con el servicio de atención al cliente en el (888) 919-0070, de L a V de 8h a 17h.
MST. Los horarios de atención se amplían durante temporada alta.
DEPURADORAS DE CARTUCHO POLYGROUP
Número de serie
P53RX0600000
P53RX1000000
P53RX1500000
P53C2000C000
Caudal de la bomba
600 gal (2271 L)
1000 gal (3785 L)
1500 gal (5678 L)
2000 gal (7570 L)
Versión
US/EU/FR/AU/GS
US/EU/FR/AU/GS
US/EU/FR/AU/GS
US/EU/FR/AU/GS
SERIES DE FILTROS DE ARENA CON BOMBA POLYGROUP
Número de serie
P53ST11000xx
P53ST16000xx
Caudal de la bomba
1100-1400 gal (4163-5299 L)
1350-1500 gal (5110-6056 L)
Versión
US/EU/FR/AU/GS
US/EU/FR/AU/GS
TABLA DE TIEMPO DE FUNCIONAMIENTO PARA EL
NIVEL DE CLORO LIBRE
Capacidad de agua
Tiempo de funcionamiento
Galones
600
1000
3000
5000
7000
Litros
2271
3785
11356
18927
26497
Impulso (horas)
1
2
5
9
12
Normal (horas)
2
3
10
17
24
Tiras reactivas de comprobación de niveles de cloro (No incluidas)
The Chlorine level test strips can be used to test the "Free Chlorine" "pH" and "Total Alkalinity" level in the water.
We recommend testing the water chemistry weekly and maintaining the chlorine concentration at 0.5-0.3 ppm.
See the directions and use.
1. Dip the entire strip into the water and remove immediately.
2. Hold the strip for 15 seconds. Do not shake excess water from the strip.
3. Compare the strip pad to the color chart on the packaging label. If necessary, adjust the chemical level in the pool water. It is very important, to use the proper
technique when testing the water's chemical level. Read and follow the written strip instructions carefully.
¡ADVERTENCIA!
DESENCHUFE EL CABLE DE ALIMENTACIÓN ANTES DE PROCEDER A LIMPIAR EL CLORADOR SALINO. ASIMISMO, TAPONE
TODOS LOS MANGUITOS DE ENTRADA Y SALIDA. DESPLACE EL CLORADOR SALINO A UN LUGAR SECO A FIN DE LIMPIARLO.
NOTA IMPORTANTE:
ESTE CUADRO SE PROPORCIONA ÚNICAMENTE COMO GUÍA ORIENTATIVA DEL INTERVALO DE FUNCIONAMIENTO
NECESARIO PARA EL SISTEMA. LOS NIVELES DE CLORO DEPENDERÁN DE LA SALINIDAD Y TEMPERATURA DEL AGUA. DE AHÍ QUE EL INTERVALO DE
FUNCIONAMIENTO REQUERIDO PARA EL SISTEMA PUEDA SER MÁS LARGO O MÁS CORTO. UTILICE TIRAS REACTIVAS PARA COMPROBAR EL NIVEL DE
CLORO DEL AGUA Y MANTENERLO A UNOS VALORES DE ENTRE 1,0 Y 3,0 PPM SI LA DEPURADORA NO INCORPORA NINGÚN TEMPORIZADOR, SERÁ
NECESARIO PONER EN MARCHA Y APAGAR MANUALMENTE EL SISTEMA DE CLORACIÓN SALINA.