15
OWNER’S MANUAL
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
MST. Extended operating days and hours during peak season requirements.
Button
Plug-in the AC plug with
GFCI into power outlet
Power (Standby mode)
Power (Normal mode)
Power (Boost mode)
Short press power button to
activate boost mode. Boost
operating is two times faster then
normal mode. Initial timer default is
8 hours. Short press the power
button again will toggle between
boost and normal mode.
Function
GFCI LED turn red
Standby mode (Standby LED
blinks once every 5sec.)
Indicate Light
Image
SALT WATER SYSTEM PART TABLE
After plug in, press the "RESET"
button to power on the unit.
Initial power mode, unit ready
Press over 2 sec. to toggle
between standby and lower case
power on, timer default is 12
hours.
Standby LED flash constantly
every 0.5 sec. 12 hours timer
countdown starts.
Standby LED continuously on,
timer LEDs count down
TEST
TEST
STAND BY
TIMER
(HOURS)
10
8
6
4
2
CELL STATUS
SALT LEVEL
WATER FLOW
STAND BY
TIMER
(HOURS)
10
8
6
4
2
CELL STATUS
SALT LEVEL
WATER FLOW
STAND BY
TIMER
(HOURS)
10
8
6
4
2
CELL STATUS
SALT LEVEL
WATER FLOW