If for some reason the base station is no longer paired with the VVX business media phone, you can follow
the steps below to pair the base station with the phone again using PC port pairing.
To pair with the base station using PC port pairing:
1 On the VVX business media phone, navigate to
Settings > Features > VVX D60 Configuration
.
2 On the VVX D60 Configuration screen, select
Base Station
, and then select
PC Port Pairing
.
Diagram 1
Pair with the Base Station using
Automatic Pairing
When an Ethernet cable is connected from the base station LAN port into any LAN outlet, all VVX business media phones
automatically display all base stations on the network as long as the devices are on the same network. This connection
architecture allows you to locate base stations at LAN switch locations throughout your network so that you are not tied
to any one physical phone location. This set up also enables you to select which base station to pair with your phone.
See Diagram 2
To pair with the base station using automatic pairing:
1 On the VVX business media phone, navigate to
Settings > Features > VVX D60 Configuration
.
2 On the VVX D60 Configuration screen, select
Base Station
, and then select
Automatic Pairing
.
3 Select a base station, then select
Pair
.
Diagram 2
