manualshive.com logo in svg

Polycom MGC-25, Getting Started Manual

Share
Download
Polycom MGC-25 Getting Started Manual Download Page 56

MGC-25 Getting Started Guide

5-8

Monitoring a Conference

When you click a conference icon, the conference appears in the 

Status

 pane. 

However, to get more details regarding the conference and participants 
statuses, it is advised to monitor the conferences through the 

Monitor

 pane in 

the main window.

Displaying the conference and participants statuses in the Monitor pane:

1.

Expand the 

MCU

 icon to display its options.

2.

Double-click the 

On Going Conferences

 icon to list the On Going 

Conferences.

3.

Right-click the conference to monitor, and then click 

Monitor

 to view all 

the conference participants.

Alternatively, on the conference right-click menu, click 

Monitor Filter

 

to view only participants of the selected filtering category.

Automatic Monitoring of conferences is available. For details, see the 

MGC 

Manager User’s Guide, Volume I, Chapter 5

.

Summary of Contents for MGC-25









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands