Chapter 3 - Initial System Setup
3-15
The
ISDN Configuration
dialog box opens.
2.
In the
ISDN Service Name
box, enter a name or use the default name
(ISDN Default Service).
3.
Select the
PRI 1A
check box to define the parameters of the first ISDN
span.
4.
If a second span is connected to the MCU, select the
PRI 1B
check box.
5.
From the
Line Type
drop-down list; select either
T1
(usually in the U.S),
or
E1
(usually in Europe).
6.
From the
Switch Type
drop-down list, select the brand and revision level
of equipment installed in the telephone company’s central office.
7.
In the
Dial-In Numbers Range
boxes
,
enter the phone numbers to be used
for dial-in connections as allocated to the MCU by your service provider.
Enter the first and last numbers in the range of phone numbers.
8.
Click
OK
.
A confirmation message is displayed.
9.
Click
OK
.
The
Network Configuration
dialog box closes and the new Network
3
4
5
6
7
2
