6)
Repeat step 5) to connect all the
touchpads according to Figure 2 and 3.
Make sure every touchpad is working
correctly by checking the clock and the
temperature displayed on the touchpad.
7)
Plug a control cable into the ‘VAV’ socket
on the main board and the other end into
the ‘24Vac IN’ port on a triple adaptor.
Plug the triple adaptor into the motorised
damper closest to the main board.
Warning - Only yellow Polyaire™
Dampers are compatible with the
system.
8)
Use another control cable to plug into
‘24Vac OUT’ port on the triple adaptor
and the other end of the cable to ‘24Vac
IN’ port on the other adaptor for the next
motorised damper.
9)
Follow Step 8) to connect all motorised
dampers in series as shown in Figure 2.
10)
Plug one end of a control cable into the
‘touchpad’ socket on the triple adaptor
and the other end into the socket on
the back of the touchpad.
11)
Follow step 10) to connect all the
dampers and touchpads together
as shown in Figure 2.
Page 6
