Now locate the center post. This will be
placed in the center of the four tables with
the large end down. It should fit snugly
between the table tops. Fig. 5.
Four 8 mm x 30 mm screws with large
washers should be screwed into the molded
nuts that are in the corners of each of the
four table tops. THESE SHOULD BE
ONLY TIGHTENED LOOSELY. Fig. 6.
You may now tighten all loose screws
in the table joiners and the four screws
in the center post. Now add sixteen
more 8 mm x 30 mm screws and large
washers to the remaining holes in the
center post, using four per table top.
Cinch these screws up tightly. Your
assembly should now look like Fig. 7.
Fig. 6
Fig. 5
NOW CHECK AGAIN TO MAKE SURE
THAT THE DISTANCE BETWEEN EACH
TABLE TOP AND ITS ADJOINING TWO
TABLE TOPS IS EXACTLY 6 INCHES.
ALSO SIGHT ALONG THE OUTER
EDGES OF THE FOUR TABLE TOPS
AND INSURE THAT THEY ARE IN
PERFECT ALIGNMENT.
Fig. 7
PAGE 3
NOTE: Use both large
and small washers as
shown in this picture
for the 20 bolts in this
page.
