LECOASPIRA PROGRAM
141
ENGLISH
- Before cleaning or storing the appliance, always first ensure that the appliance has cooled down completely.
- Do not direct the steam jet at people, animals or debris.
- High-pressure jets can be dangerous if used improperly.
- Do not direct the steam jet at people, live electrical equipment or the appliance itself.
- Never place your hands inside the jet of steam.
- While refilling with water, switch off and disconnect the appliance from the mains.
- Do not use if the appliance has been dropped, has visible signs of damage or leaks.
- Do not use the appliance to suck up acids or solvents, as these might cause serious damage to the
appliance and above all do not suck up explosive dust or liquids, as these could cause explosions on
coming into contact with the inside components of the appliance.
- Do not suck up toxic substances.
- Do not suck up burning or incandescent objects such as embers, ash or other material in which com-
bustion is taking place.
- If ironing whilst sitting down, take care to ensure that the jet of steam is not angled towards your legs.
Steam can scald.
- Before connecting the appliance to the current, ensure that the continuous steam jet button is not
pressed.
- Never leave the iron unattended when it is plugged in.
- Before refilling the appliance when it is hot, allow it to cool for a few minutes.
- Keep your face away if you fill the boiler when it is still hot, as a few drops of water can evapo-
rate on contact with the hot boiler, causing a jet of steam.
- Do not empty the appliance when the water inside the boiler is still hot.
- Do not try to unscrew the cap when the appliance is in operation.
- Regularly check the status of the safety cap and seal, replace with original parts as necessary.
- Make sure the safety cap is screwed on properly, otherwise it may cause steam leaks.
- Do not force open the cap when there is a minimum pressure of steam in the boiler.
SAFETY WARNINGS
using the appliance:
- By nature, water contains magnesium, mineral salts and other deposits that favour the formation of
scale. To prevent these deposits from causing damage to the appliance, use KALSTOP FP 2003, a
special natural descaling agent that removes scale. This allows avoiding scale formation and protec-
ting the metal walls of the boiler. KALSTOP FP 2003 can be found in small appliance stores and Polti
service centres. Alternatively, use a 50/50 mixture of tap water and demineralised water.
- Never use distilled water or scented water.
- Do not put any detergent or chemical substance in the boiler.
-
We recommend you use original Polti products only, as products of other brands may not be
suitable for use in Polti products and could cause damage.
- Never leave the appliance exposed to the weather.
- Do not place the appliance near a live element, an electric stove or any other source of heat.
- Do not expose the appliance to temperatures unde 32°F (0 °C) e superiori ai 104°F (40 °C).
- Press the buttons only with a finger, without excessive force and avoid using a pointed object such as
a pen.
- Do not wind the power cable around the appliance, especially when the appliance is still hot.
- To avoid prejudicing the safety of the appliance when repairing or replacing accessories, use only ori-
ginal spare parts.
ATTENTION
:
Danger of burns!
LECOASPIRA
PROGRAM
- M0S10133 1S01_7:Layout 1
04/05/2012
10.07
Pagina 141
Summary of Contents for VAPORETTO LECOASPIRA PROGRAM
Page 1: ...PROGRAM...
