LECOASPIRA PROGRAM
151
ENGLISH
HARD FLOORS (MARBLE, GRANITE, TILE)
VACUUM FUNCTION
vacuum up dust and liquids or effectively remove animal hair
MANUAL MODE
PROGRAMMED MODE
Press the suction button
(A4)
to begin vacuu-
ming. Adjust suction to level 4 (see paragraph
5.1) to vacuum up dust or liquid. To stop suc-
tion, just press the button
(A4).
PROGRAMME P0
Set the P0 programme described in the para-
graph “TO USE THE APPLIANCE WITH THE
PRE-SET PROGRAMMES”.
Holding the suction button down (
A4
) suction
will be activated at the maximum pressure. It is
possible to stop the programme manually by
pressing the button (
A4
) again.
STEAM AND VACUUM FUNCTION
Wash and vacuum even the dirtiest floors. This function enables the sanitisation of all types of
hard flooring, such as marble, granite and ceramic.
N.B. Before steaming surfaces, we recommend vacuuming up any hair or dust, using the
vacuum only function in manual mode or with the P0 programme.
Switch on the boiler and set the steam pressure according to how dirty the surface to be treated
is, following the instructions in the relative paragraph (5.2).
Press the button
(A5)
on the handle to dispense steam over the surface to be cleaned.To stop
the steam flow, simply release the button
(A5)
.
Then activate suction by means of the button (A4) to dry the surface treated. Keeping the but-
ton pressed
(A4)
, select the desired suction power (see paragraph 5.1).
N.B. If the floor is not very dirty, you can activate steam and vacuum together, to wash and dry
at the same time.
LECOASPIRA
PROGRAM
- M0S10133 1S01_7:Layout 1
04/05/2012
10.07
Pagina 151
Summary of Contents for VAPORETTO LECOASPIRA PROGRAM
Page 1: ...PROGRAM...
