LECOASPIRA PROGRAM
166
ENGLISH
Follow the instructions listed below to adjust the amount of steam in relation to the fabric being
ironed:
NOTE:
Because of the high pressure at which the product supplies steam, the maximum level of
steam which can be selected for the ironing programme is 3 notches. This value is however suffi-
cient to obtain the best results also on heavier fabrics.
In order to optimise ironing times, we recommend starting to iron the more delicate fabrics first
(steam quantity 0 or 1) and then moving on to fabrics that require greater steam pressure.
Otherwise, although the supply of steam is not prevented, it will be necessary to wait for the boiler
to cool down to allow the appliance to reach the steam pressure selected.
• Adjust the temperature of the iron by positioning the temperature adjustment knob (
S4
) to COT-
TON-LINEN.
• Wait a few minutes for the iron heating indicator light (
S3
) to go off, indicating that the iron has
reached the established temperature.
• Press the steam request button (
S2
) to allow steam to escape.
Releasing the button, the flow of steam stops. When first operating the iron, some drops of water
may leak from the plate mixed with the steam due to imperfect thermal stabilization. We there-
fore recommend that the first jet of steam be directed onto a rag.
• To have a continuous jet of steam move the button forward (
S1
). The steam will continue to
come out even when the button is released (
S2
). To stop the steam, move the continuous jet in-
sert button backward (
S1
).
DRY IRONING
ATTENTION
: when ironing dry, no indicator (
8B
) should be lit.
For dry ironing, before switching on the boiler, adjust the temperature of the iron
by turning the knob (
S4
) to the temperature required according to the fabric, indi-
cated on the knob itself.
1 level on = WOOL
2 levels on = COTTON
3 levels on = LINEN
all levels off =
SYNTHETICS and SILK
LECOASPIRA
PROGRAM
- M0S10133 1S01_7:Layout 1
04/05/2012
10.07
Pagina 166
Summary of Contents for VAPORETTO LECOASPIRA PROGRAM
Page 1: ...PROGRAM...
