POLTI CIMEX ERADICATOR, Instruction Manual

Page: 29 / 84

ю
10. TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The appliance does not turn
on. No power. Check that the product has
been connected to the mains,
as indicated in Section 1.
The “steam ready” indicator
light and the steam dispenser
light come on and go off du-
ring use. This indicates that the
electrical resistor has
started to work to keep
the pressure constant It is a normal phenomenon, no
action is necessary.
Does not dispense steam. Out of water.
The boiler is not yet
pressurised.
The steam dispenser is
not inserted correctly.
Child safety inserted.
Add water to the boiler as de-
scribed in Section 5.
Wait until the steam indicator
light comes on.
Insert the steam dispenser (4
)
correctly all the way down.
Deactivate the safety switch.
Steam does not come out
and the cap won’t unscrew. Steam button broken. Do not try to open the cap.
Take the device to an Authori-
sed Service Centre.
The appliance is pressurized
but little steam comes out. Steam adjustment dial
set to the
minimum
.
Adjust the position of the dial
for the desired increase.
During use the appliance
does not consume HPMED. The stopper inside the
bottle has not been in-
serted correctly. Insert the stopper correctly,
following the instructions in
Section 1.
If problems persist or are not listed above, please contact a Polti Authorised Service Centre
(www.polti.com for the updated list) or contact Customer Services.
EN
GL
ISH
| 29 |
VT CIMEX ERADICATOR - M0S11512 - 1R05_FEV 1000-950.qxd 05/06/2017 17:14 Pagina 29