POLITEC s.r.l. | Sandor Dual Sma manual – Ver. 2.4
13
3)
Start the alignment of the transmitter is on the barrier by checking the position of the DIP switch 7 to
ON and activating the TEST optics TX (1 or 2 or 3 or 4), by pressing the dedicated button for about 3
seconds until the orange LED TEST will lit up.
4)
Place in the corresponding optical TEST (1 or 2 or 3 or 4) on coral receiver, checking the position of the
DIP switch 7 to ON and pressing the dedicated button for 3 seconds until the the BUZZER and the LED
TEST turns ON, (with high brightness)
5)
Through the TRANSMITTER lens shifts, find the maximum optical alignment based on the Buzzer and
LEDs (with high brightness), the increase in the frequency of flashing (until the LEDs is fix on and the
whistle of the corresponding BUZZER) indicate a better ALIGNMENT.
TEST
BUTTON
DIP 7 ON
TEST
BUTTON
DIP 7 ON
ORANGE
LED
ORANGE
LED
DIP 7 ON
TO ACTIVATE
THE LED
DIP 7 ON
TO ACTIVATE
THE LED
