POLITEC s.r.l. | Sandor Dual Sma manual – Ver. 2.4
18
10
SETTING AND PROGRAMMING MOTHER BOARD
TX
CHARACTERISTICS AND DIP SWITCH SET
The system provides a single dip switch for the configuration of the transmitter, in particular, you can choose 4
different transmission channels. In addition there is the possibility to activate the single LED on the board
flashes DUAL TX power of the barrier.
ON
1 2 3 4 5
CONNECTORS DESCRIPTION
The connector has:
Power supply: 10-30VDC;
Tamper output;
Power supply 12-24V AC-DC: For the heaters on board DUAL and optics. Depending on the type
of power supply position the jumpers dedicated as in the figure;
On the card is provided an input for the tamper. In case of absence of the latter close the entrance with a
jumper.
NB: This does not include the termostatore, you can use the accessory SANDOR TS which is a kit made
for additional thermostat SANDOR DUAL.
TAMPER
SUPPLY LED
POWER SUPPLY
12-30 Vcc
POWER HEATERS
12-24 Vcc
POWER HEATERS
12 V
12 V
24 V
24 V
DIP SWITCH
TAMPER