POLITEC s.r.l. | Sandor Dual Sma manual – Ver. 2.4
10
RX OPTICAL
1
2 3 4 5 6 7
1 2 3 4 5 6
RX1
RX2
To test the functionality of optics TX put ON the DIP 7 and see the activation of the power LED. Set SW4 to
supply of the heaters. 24V (standard) or 12V. The voltage can be AC or DC.
In the J4 jumper reads the value of the signal in volts.
NB: The settings relating to addresses are already set to Default.
24V
12V
HEATER SUPPLY
TEST SIGNAL POINT
TAMPER
SIGNAL
LOW LED
LED
TEST
