Politec S.r.l. | Manual Ales – Ver. 1.7.2
2
Index
1 MAIN COMPONENT LIST
Pag. 3
2 INSTALLATION TIPS
Pag. 5
3 INSTALLATION
Pag. 6
WALL MOUNTING
Pag. 6
POLE MOUNTING
Pag. 6
4 CONNECTIONS AND DESCTIPRIONS
Pag. 7
CABLE AND WIRING
Pag. 7
TRASMITTER/RECEIVER
Pag. 8
5 FREQUENCY SELECTION
Pag. 9
6 ALLIGNMENT TEST
Pag. 9
7 SETTING TIME
Pag. 11
TIME CHOICE
Pag. 11
8 ENVIRONMENTAL DISQUALIFICATION
Pag. 13
9 ADDITIONAL TAMPER
Pag. 13
10 TECHNICAL FEATURES
Pag. 14
Installation recommendation
Verify that the beam tower is fully watertight once the cover and end caps have been correctly filled at the
end of the installation.
The missed used of proper accessories decrease the IP grade protection of the product.
Avoid any type of obstruction between the transmitter and receiver.
Avoid installation of receivers beams in a position where are exposed to direct sunlight (with same angle),
especially at sunset and sunrise.
Do not install multiple beams where the transmitter beam can interfere with other receiver beams. It is
always better place either transmitter or receivers back to back.
