18
COMMUNICATION MODE BY RADIO CHANNEL WITH POCKET PC
4
1
.
In the communication mode with
РРС
by radio channel, of Bluetooth type the modification
indicators:
РМ
1703
МВ
,
РМ
1703GNB
make it possible to identify the radio nuclide substance composition.
For setting the communication between the indicator and the "Bluetooth" mode should be switched
on in the indicator. For this purpose a MODE push button should be started for several times until the note [–
bt–off] is indicated on the LCD. A LIGHT push button should be used for switching over the state of
«Bluetooth» to [–bt–on].
Further
the
user’s
program "Smart2003" should be
started.
Indicator operation in this mode
is described in Help site and
supplied on a CD.
Attention!
1. In case of the indicator operation in the mode of communication with
РРС
access to the mode of settings of the
indicator with the aid of indicator settings on the front panel will be IMPOSSIBLE. All settings are performed
with the aid of
РРС
.
2. It should also be taken into account that in case of inclusion of "Bluetooth" mode power supply of the
indicator essentially increases.
At switching over the "Bluetooth" mode the indicator enters after approximately 1 minute the sleeping mode,
and being so, LCD will have the following forms:
•
the radio channel is on, no communication with the P
РС
;
•
the radio channel is on, communication with the PPC has
been established
;
For switching off the «Bluetooth» mode a MODE should shortly be switched on several times until
[–bt–on] note is indicated. A LIGHT button is to be used for switching over the state «Bluetooth» in [–bt–
off].
MODE OF SETTINGS
The indicator is included to the mode of settings at long (more than 5 s) pressings of MODE push
buttons. By a short pressing of MODE button the user selects the preset parameter:
-the preset n-factor value (the number of average square deviations) should be checked or a new one
is to be set up in the channel of gamma-radiation registration (the range of n factor setting is equal from 1
to9,9 with discreteness 0,1);
- the preset n-factor value or a new one is to be set up in the channel of neutron radiation registration
(
РМ
1703GN
О
,
РМ
1703GN
А
,
РМ
1703GN
В
);
- the preset value is to be checked or a new value of the searching threshold is to be set as per MED
for the searching mode "0-9" (the threshold setting range is equal to 15 – 7777
µ
R/h (0.15-77.77
µ
Sv/h),
recommended - 30
µ
R/h (0,3
µ
Sv/h));
4
a PPC with the Bluetooth installed should be used for indicator operation in the said mode.