2
INTRODUCTION
The PS-5565 two-way alarm pager system is the brainchild of over 2 years of research, development and
dedication. With over 12 years of experience to feed from, our product development team was faced with
the difficult task of creating a full-featured high-end alarm / remote starter system. The PS-5565TW was
created to maintain low cost, while still offering all the great security features that are only available on
very expensive products. This was done without compromising our solid reputation for quality, cost and
reliability.
The result would exceed far beyond what we had imagined; the feature filled PS-5565TW has met every
criteria for security, quality and reliability. With the addition of over 15 new features, this product will
satisfy any demand for high-end systems, and standard features.
After installing the system, we hope you too will agree that the new PS-5565TW is a breakthrough in
vehicle convenience technology, and remote starter systems.
WHAT’S INCLUDED
Please review the installation guide before beginning the installation, particularly the installation
schematic and the programming options.
It is very important that you familiarize yourself with the programming and the operation of the PS-
5565TW system, even if you have already installed a Polarstart system in the past.
There are many great new features that may be overlooked if the manual is not read, therefore not
maximizing the potential of the PS-5565TW.
Prior to the installation be sure that all the hardware components required to install the system are in the
box.
- The following is a list of components included in the kit:
Kit should also include the following:
•
5 pin main IGNITION harness
•
7 pin secondary harness
•
11 pin accessories harness
•
Users guide and Installation manual
•
1- 6 Tone 130db Siren
•
1- Plug-in shock sensor
•
1- Single wire for 2
nd
IGNITION / ACCESSORY / CRANK
•
PS-5565TW Control unit
•
5 button Two-Way transmitter
•
Two-Way Transceiver
•
Plug-in VALET
•
Plug-in 2 volt L.E.D
•
Hood switch
