Repair Manual
Macro 5 SLR Camera
25
3. While this self-check routine is checking the camera's status, focus and frame
the subject.
For detailed information on how to properly focus and frame the subject, refer
to the Macro 5 SLR User's Guide.
4. Once the camera is properly focused and the status lights are green, press
the shutter button (S1/S2) all the way in to take the picture. This action
closes the S2 switch.
Closing the S2 switch:
•
Fires the strobes.
•
Actuates the shutter.
Note:
The camera will take a picture only when it is properly focused, the
strobes are fully charged, and the self-check routine is in progress.
5. The picture will automatically eject from the camera when the shutter button is
released.
Note:
The camera powers down (shuts off) when:
•
Picture count reaches zero (0).
•
Self-check continuous loop times out - no camera activity for thirty
(30) seconds (
button pressed, setting changed, picture taken,
etc.
).
Summary of Contents for Macro 5 SLR
