Repair Manual
Macro 5 SLR Camera
15
Table 1-2. Control Panel Features
Camera Feature Description
POWER Button
Turns the camera On. The flash units
begin charging. The camera turns off if the
power button is pressed again, or after 30
seconds of inactivity.
Note:
The camera can also be turned on
by slightly pressing the shutter (S1)
button.
Low Battery
Lights up when the batteries are low.
Status Light
The ranging lights also become dim.
Flash Control
Selectively turns the flash units on or off.
Button/Status lights
(Normally both flash units are turned on.)
The red charging status light above the
flash control button blinks while the flash
units are charging. The green status lights
comes on when the flash unit/s are fully
charged (ready).
Press the flash control button once to turn
off the right flash unit; press it a second
time to turn off the left flash unit; press it a
third time to turn off both flash units.
RESET Button
Resets the camera to the nominal flash and
lighten/darken settings for the current
magnification.
Note:
The camera has a memory and
returns to the custom settings for
each magnification when it is turned
on.
Summary of Contents for Macro 5 SLR
