manualshive.com logo in svg

Polaroid ID-3000, Repair Manual

Share
Download
Polaroid ID-3000 Repair Manual Download Page 71

Polaroid ID3000 Service Manual

        System Installation

2-49

Adjustment Procedure

1.

Turn on the system and log on as CPS. From the Main Menu, select Issue and Verify
Badges, and from the Issue and Verify Menu, select Adjust System.

2.

Next select Signature Scanner to display the instructions for adjusting the signature
area  (Figure  2-47). Follow screen instructions to adjust the signature.

           Figure 2-47  Signature box adjustment instructions

3.

Press the <Enter> key and the system will now ask you to insert the signature card.

4.

After the signature card has been signed with a medium-point black felt tip pen, insert the
card signature-side up, cut corner end first, into the Scanner Figure 2-48).

     Figure 2-48 Inserting card into Scanner

5.

The Scanner will pull the card in and then eject it. Remove the card from the Scanner.
The signature will now appear reversed on the screen.

Summary of Contents for ID-3000

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands