manualshive.com logo in svg

Polaroid ID-3000, Repair Manual

Share
Download
Polaroid ID-3000 Repair Manual Download Page 53

Polaroid ID3000 Service Manual

        System Installation

2-31

The screen will display the applicant data if it is available.  (Working .  . .  may
appear while the information is being retrieved.)

If the information is not available, Record Not Found appears in the center of the screen.
Press any key to continue.  Then you can try again to enter the ID card number and press
<F10> to search again.

If this still fails to produce the applicant data, press <Esc> twice and select Make a New
ID Card. (See page 2-13.)

You can also use the ID-3000 enhanced search feature described in the operator’s
instructions to locate the applicant’s record.

4.

Check the data for accuracy. If more than one screen of data exists for an applicant, use
<Page Up> and <Page Down> to view data.  If it is necessary to complete or correct the
data, use the up and down arrow keys to position the cursor at the desired location and
type the new information.

5.

When all information is complete and correct, press <F10> to open the exposure window
(Figure 2-27):

    Figure 2-27   Exposure/Preview screen

6.

To preview the card before exposure, select Preview from the exposure window.  The
monitor will display the card in full color (vertical cards will be rotated to a horizontal
position).

Summary of Contents for ID-3000

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands