manualshive.com logo in svg

Polaroid ID-3000, Repair Manual

Share
Download
Polaroid ID-3000 Repair Manual Download Page 30

Polaroid ID3000 Service Manual

        System Installation

2-8

Checking computer internal connections

Computer circuit boards and cables can loosen during shipping and cause malfunctions.  Check them
as follows before proceeding further with installation:

1.

Remove the computer cover (Figure 2-6).

2.

Visually inspect all computer components to assure they are fully seated in their slots,
sockets and board guides, and that all cable connections are secure, especially the alpha
cable that connects between the matrox board and the VGA  board.

3.

Inspect the battery wire and its connection to the board, and tighten if necessary.

4.

Replace the computer cover.

.

Figure 2-6   Removing the Computer Cover

Summary of Contents for ID-3000

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands