- 3 -
The DVR Setup Menu
Installation:
The DVD-Recorder is equipped with a
TV tuner making it possible for you to watch TV or
record your favorite shows to DVD for later playback.
1.
Connect your cable TV or antenna to the TUNER
input jack found on the back of the DVD player. (See
page 14)
2.
Make the appropriate Audio/Video connections
(see pages 11-14).
3.
Plug in your DVD-Recorder. Now you’re ready to
configure the DVD-Recorder.
Initial Configuration
1.
Turn on the TV.
2.
Press the
POWER
button on the remote to turn
on the DVD-Recorder and press the
SETUP
button
to call up the Menu. Use the
(direction
buttons) to select the desired option, then press
ENTER
.
Note: During DVD playback, if you want to watch
TV, please highlight the Watch TV, and press
ENTER.
During MP3 or CD playback, if you want to watch
TV, please open the disc tray and take out the
disc first.
Auto-Channel Scan
1.
After you’ve selected the
setup
menu
, return to
the
Recording Setup
menu and select the
Channel
Setup
function. Select
Auto CH Scan
option and
press the
Enter
button on the remote control so that
the DVD-Recorder can begin to program itself using
the auto-channel scanning function.
2. When the
Auto CH Scan
function is selected, the
auto-channel scanning process begins.
3. After the auto-channel scanning process finishes,
the total number of channels found is shown on the
bottom left portion of the
Recording Setup
menu.
4. Select the
Channel List
function to display the
complete list of all the channels that were found
during the auto-channel scanning process.
5. Press the
SETUP button
on the remote to exit
and save the selection.
Figure 1. The menu
Figure 2. The Channel Setup Options
Summary of Contents for DVR-0800
Page 1: ...1 DVD Player Recorder DVR 0800 Operation Manual...
Page 10: ...10...