37
MAINTENANCE
Engine Oil and Oil Filter Replacement (Continued)
8. Install the new oil filter. Tight-
en the filter one full turn after
O-ring contacts engine case.
9. Fill the engine with 6 quarts of
oil .
10. Install the dipstick and check
oil level.
CAUTION
Do not put in any chemical additives. Victory’s motorcycle oil has been specially
designed for this application and any additional additives are not necessary and
have not been tested by Victory.
Take care not to allow foreign material to enter the crankcase.
Start the engine and warm it up for several minutes. While warming up, check for
oil leaks. If any leaks are found, stop the engine immediately and determine the
source of the problem before starting the engine again. Consult your Victory dealer
if you cannot determine or repair the source of the problem.
After the engine is started, the oil indicator light should go off.
CAUTION
If the indicator light flickers or remains on, immediately stop the engine and take
your motorcycle to a Victory dealer.
TIGHTENING TORQUE
Drain Plug
28 ft. lbs. (3.9 kg-m)
Oil Filter
1 full turn after O-ring contacts the
sealing surface
OIL QUANTITY
Oil and Filter Change
6 quarts (6.7 liters)
