Polaris Victory Sport Cruiser 2001 Owner'S Manual Download Page 72

Page: 72 / 73

VICTORY MOTORCYCLE WARRANTY POLICY

The exclusive remedy for breach of this warranty shall be, at Victory Motorcycle

Division, Polaris Sales Inc. exclusive option, repair or replacement of any defective

materials, or components or products. THE REMEDIES SET FORTH IN THIS

WARRANTY ARE THE ONLY REMEDIES AVAILABLE TO ANY PERSON FOR

BREACH OF THIS WARRANTY. VICTORY MOTORCYCLES DIVISION OF PO-

LARIS SALES INC. SHALL HAVE NO LIABILITY TO ANY PERSON FOR INCI-

DENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY DESCRIPTION,

WHETHER ARISING OUT OF EXPRESS OR IMPLIED WARRANTY OR ANY

OTHER CONTRACT, NEGLIGENCE, OR OTHER TORT OR OTHERWISE.

Some states do not permit the exclusion or limitation of incidental or consequential

damages or implied warranties, so the above limitations or exclusions may not ap-

ply to you if inconsistent with controlling state law.
ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE) ARE LIMITED IN DURATION TO THE ABOVE ONE YEAR WARRAN-

TY PERIOD. VICTORY MOTORCYCLES DIVISION OF POLARIS SALES INC.

FURTHER DISCLAIMS ALL EXPRESS WARRANTIES NOT STATED IN THIS

WARRANTY OTHER THAN EMISSIONS AND EXCISE WARRANTIES. Some

states do not allow limitations on how long an implied warranty lasts, so the above

limitation may not apply to you if inconsistent with controlling state law.

HOW TO OBTAIN WARRANTY SERVICE

If your Victory Motorcycle requires warranty service, you must take it to a Victory

Motorcycle Servicing Dealer. When requesting warranty service you must present

your copy of the Warranty Registration form to the dealer. (THE COST OF TRANS-

PORTATION TO AND FROM THE DEALER IS YOUR RESPONSIBILITY). Victory

Motorcycles division of Polaris Sales Inc. suggests that you use your original sel-

ling dealer; however, you may use any Victory Motorcycle Servicing Dealer to per-

form warranty service.
Please work with your dealer to resolve any warranty issues. Should your dealer

require any additional assistance they will contact the appropriate person at Victory

Motorcycles division of Polaris Sales Inc.
This warranty also gives you specific legal rights, and you may also have other

rights which vary from state to state.
If any of the above terms are void because of state or federal law, all other warranty

terms will remain in effect.
ENGINE OIL
1. Always use Polaris engine oil.
2. Never substitute or mix oil brands as serious engine damage and voiding of war-

ranty can result.

ProCarManuals.com

Summary of Contents for Victory Sport Cruiser 2001










































































Search results

Summary of Contents for Victory Sport Cruiser 2001

Reviews:

Related manuals for Victory Sport Cruiser 2001

Brands by name

Popular brands

Polaris Victory Sport Cruiser 2001, Owner'S Manual

Search results

Summary of Contents for Victory Sport Cruiser 2001

Reviews:

Related manuals for Victory Sport Cruiser 2001

Brands by name

Popular brands