Polaris Victory Sport Cruiser 2001 Owner'S Manual Download

Page: 49 / 73

MAINTENANCE

Front Fork Inspection

CAUTION:

Securely

support the motorcycle so there

is no danger of it falling.

Oil Leak Check

Check for oil leakage. If any

leakage is detected, take the

machine to a Victory dealer for

repairs.

Operation Check

Place the machine on a level

place. Hold the machine in an

upright position and apply the

front brake. Push down hard on

the handlebars several times to

determine if the forks operate

smoothly. Check for loose steer-

ing or abnormal noise. Check

tightness of all fasteners.

CAUTION

If unsmooth movement, dam-

age, looseness or abnormal

noise is detected in front fork,

take your motorcycle to a Victory

dealer for inspection.

WARNING:

Do not operate a motorcycle with faulty suspension. Loose, dam-

aged, worn or improperly adjusted suspension parts impair vehicle stability and control.

Rear Wheel Alignment Inspection & Adjustment

It is recommended that your Victory dealer perform all rear wheel alignment inspec-

tions and adjustments.

ProCarManuals.com

Summary of Contents for Victory Sport Cruiser 2001










































































Search results

Summary of Contents for Victory Sport Cruiser 2001

Reviews:

Related manuals for Victory Sport Cruiser 2001

Brands by name

Popular brands

Polaris Victory Sport Cruiser 2001, Owner'S Manual

Search results

Summary of Contents for Victory Sport Cruiser 2001

Reviews:

Related manuals for Victory Sport Cruiser 2001

Brands by name

Popular brands