Polaris SuperSport Page 86 Owner'S Manual Download

Page: 86 / 137

MAINTENANCE

Carburetor

The number stamped in the end of the main jet indicates the jet size. The

jet installed at the time of manufacture is not necessarily correct for your

elevation. It's your dealer's responsibility to make sure the correct main

jet is installed.

Carburetor Adjustments

The frequency at which the carburetors are synchronized or balanced is

important. Properly adjusted carburetors can greatly improve engine

performance, fuel economy, engine life, and reliability.

If you notice any of the following conditions, the carburetor may need

adjustment:
• Hard starting
• Poor idle
• Overheated pistons and cylinder walls
• Plug fouling
• Poor engine response to various throttle valve openings

CAUTION

Operating the snowmobile with incorrect jetting can result in serious engine

damage. Have your Polaris dealer perform all carburetor adjustments to

ensure all adjustments are done correctly.

Summary of Contents for SuperSport










































































































































Search results

Summary of Contents for SuperSport

Reviews:

Related manuals for SuperSport

Brands by name

Popular brands

Polaris SuperSport, Owner'S Manual

Search results

Summary of Contents for SuperSport

Reviews:

Related manuals for SuperSport

Brands by name

Popular brands