Polaris SuperSport Page 24 Owner'S Manual Download

Page: 24 / 137

SAFETY

Safety Decals and Locations

Warning decals have been placed on the snowmobile for your protec-

tion. Read and follow the instructions of the decals and other warnings

on the snowmobile carefully. If any of the decals depicted in this manual

differ from the decals on your snowmobile, always read and follow the

instructions of the decals

on the snowmobile

If any decal becomes illegible or comes off, contact your Polaris dealer

to purchase a replacement. Replacement safety decals are provided by

Polaris at no charge. The part number is printed on the decal.

Clutch Cover Warning

This warning decal is found under the hood on the clutch cover:

WARNING
Do not operate engine with hood open.
Do not attempt adjustment with engine running.
Do not operate engine with this guard open.
Never run engine with drive belt removed.
Never service clutches yourself -- see your dealer.

Air Box Warning

This warning decal is found under the hood on the air box:

Do not operate above 40 mph with hood-to-air box foam removed

or engine failure will result.

Summary of Contents for SuperSport










































































































































Search results

Summary of Contents for SuperSport

Reviews:

Related manuals for SuperSport

Brands by name

Popular brands

Polaris SuperSport, Owner'S Manual

Search results

Summary of Contents for SuperSport

Reviews:

Related manuals for SuperSport

Brands by name

Popular brands