Polaris SuperSport Page 13 Owner'S Manual Download

Page: 13 / 137

SAFETY

Operator Safety

Survival Preparation

For your safety, always ride in a group of other snowmobilers. Always

tell someone where you're going and how long you expect to be gone. If

it isn't possible to ride with others, and you must travel into remote

areas, always carry survival equipment that's appropriate to the condi-

tions you may encounter. Such equipment may include, but is not lim-

ited to: extra clothing, a sleeping bag, a flashlight, food and water, a

signaling mirror, a means of building a fire, and a two-way radio or cel-

lular telephone.

For added protection, carry the following items on your snowmobile at

all times:

• Spare Drive Belt

• Winter Survival Kit

• Extra Set of Spark Plugs

• Trail Map

• Tow Rope

• Owner's Manual

• Extra Oil

• First Aid Kit

• Fuel Deicer

Summary of Contents for SuperSport










































































































































Search results

Summary of Contents for SuperSport

Reviews:

Related manuals for SuperSport

Brands by name

Popular brands

Polaris SuperSport, Owner'S Manual

Search results

Summary of Contents for SuperSport

Reviews:

Related manuals for SuperSport

Brands by name

Popular brands