Polaris SuperSport Page 100 Owner'S Manual Download

Page: 100 / 137

MAINTENANCE

Track

Track Lubrication

The slide rail needs snow for lubrication. Excessive wear indicates

insufficient lubrication. A new rail slide can cause faster heat build-up

in limited lubrication, resulting in excessive wear.

NOTE:

If excessive rail slide wear occurs due to poor snow conditions,

additional wheel kits are available. See your dealer for more

information.

NOTE:

Track damage or failure caused by operation on ice or under

other poor lubrication conditions will void the track warranty.

WARNING

Operating with insufficient lubrication between the rail slide and track guide

clips can cause track failure, loss of vehicle control and loss of braking ability,

which can result in serious injury or death. Avoid operating for extended peri-

ods on ice and other surfaces that have little or no snow for lubrication.

Summary of Contents for SuperSport










































































































































Search results

Summary of Contents for SuperSport

Reviews:

Related manuals for SuperSport

Brands by name

Popular brands

Polaris SuperSport, Owner'S Manual

Search results

Summary of Contents for SuperSport

Reviews:

Related manuals for SuperSport

Brands by name

Popular brands