Polaris Sportsman Forest 550 Owner'S Manual Download

Page: 60 / 146

OPERATION

Hauling Cargo

1. Never exceed the weight

capacities specified for your
vehicle on warning labels and in
the specifications section of this
manual.

2. Cargo weight should be evenly

distributed (1/3 on the front rack
and 2/3 on the rear rack) and
mounted as low as possible.

3. When operating over rough or

hilly terrain, reduce speed and
cargo weight to maintain stable
driving conditions.

4. NEVER exceed 50 MPH (80 km/h) when rear cargo loads are above

75 lbs. (34 kg) and/or front cargo loads are above 37 lbs. (17 kg).

5. NEVER exceed 10 MPH (16 km/h) when rear cargo loads are above

200 lbs. (91 kg) and/or front cargo loads are above 100 lbs. (45 kg).

6. Use low forward gear when hauling or towing heavy cargo to

extend belt life.

1/3

2/3

Summary of Contents for Sportsman Forest 550



















































































































































Search results

Summary of Contents for Sportsman Forest 550

Reviews:

Related manuals for Sportsman Forest 550

Brands by name

Popular brands

Polaris Sportsman Forest 550, Owner'S Manual

Search results

Summary of Contents for Sportsman Forest 550

Reviews:

Related manuals for Sportsman Forest 550

Brands by name

Popular brands