Polaris Sportsman Forest 550 Owner'S Manual Download

Page: 56 / 146

OPERATION

Driving Downhill

When driving downhill, follow
these precautions:

1. Always move the 4X4 switch

to ADC 4X4 before ascending
or descending a hill. See page
30.

2. Avoid hills with slippery or

loose surfaces.

3. Never drive downhill at high

speed. Slow down.

4. Drive straight downhill.

Avoid driving downhill at an
angle, which can cause the
vehicle to pitch sharply to one side.

5. Shift your weight rearward.

6. Apply the brakes

slightly

to aid in slowing.

Always follow the procedures outlined in this
manual for driving downhill and for braking on
hills.

Never operate at excessive speeds. Travel
and turn at speeds appropriate for the terrain,
visibility, operating conditions and your
experience.

Summary of Contents for Sportsman Forest 550



















































































































































Search results

Summary of Contents for Sportsman Forest 550

Reviews:

Related manuals for Sportsman Forest 550

Brands by name

Popular brands

Polaris Sportsman Forest 550, Owner'S Manual

Search results

Summary of Contents for Sportsman Forest 550

Reviews:

Related manuals for Sportsman Forest 550

Brands by name

Popular brands