Polaris Hawkeye 2x4 Owner'S Manual Download Page 23

Page: 23 / 134

SAFETY

Operator Safety

WARNING

POTENTIAL HAZARD
Attempting wheelies, jumps

and other stunts.
WHAT CAN HAPPEN
Attempting stunts increases

the chance of an accident,

including an overturn.
HOW TO AVOID THE

HAZARD
Never attempt wheelies,

jumps, or other stunts. Avoid

exhibition driving.

WARNING

POTENTIAL HAZARD
Failure to inspect the ATV before operating.
Failure to properly maintain the ATV.
WHAT CAN HAPPEN
Poor maintenance increases the possibility of an accident or

equipment damage.
HOW TO AVOID THE HAZARD
Always inspect your ATV before each use to make sure it’s in

safe operating condition.
Always follow the inspection and maintenance procedures and

schedules described in the owner’s manual.

Summary of Contents for Hawkeye 2x4







































































































































Search results

Summary of Contents for Hawkeye 2x4

Reviews:

Related manuals for Hawkeye 2x4

Brands by name

Popular brands

Polaris Hawkeye 2x4, Owner'S Manual

Search results

Summary of Contents for Hawkeye 2x4

Reviews:

Related manuals for Hawkeye 2x4

Brands by name

Popular brands