Polaris Hawkeye 2x4 Owner'S Manual Download Page 24

Page: 24 / 134

SAFETY

Operator Safety

WARNING

POTENTIAL HAZARD
Removing hands from the handlebars or feet from the footrests

during operation.
WHAT CAN HAPPEN
Removing even one hand or foot can reduce ability to control the

vehicle or could cause loss of balance and ejection from the ATV.
If the operator’s foot is not firmly planted on the footrest, it could

come into contact with the rear wheels and lead to accident or

injury.
HOW TO AVOID THE HAZARD
Always keep both hands on the handlebars and both feet on the

footrests of the ATV during operation.

WARNING

POTENTIAL HAZARD
Failure to use extra

caution when operating

the ATV on unfamiliar

terrain.
WHAT CAN HAPPEN
Unfamiliar terrain may

contain hidden rocks,

bumps, or holes that could

cause loss of control or

overturn.
HOW TO AVOID THE HAZARD
Travel slowly and use extra caution when operating on unfamiliar

terrain. Always be alert to changing terrain conditions.

Summary of Contents for Hawkeye 2x4







































































































































Search results

Summary of Contents for Hawkeye 2x4

Reviews:

Related manuals for Hawkeye 2x4

Brands by name

Popular brands

Polaris Hawkeye 2x4, Owner'S Manual

Search results

Summary of Contents for Hawkeye 2x4

Reviews:

Related manuals for Hawkeye 2x4

Brands by name

Popular brands