Polaris A09BA50FA, User Manual

Page: 20 / 256

MAINTENANCE
2.10
LUBRICATION, CONT.
7. Tie Rod End
6. Ball Joint
5. AWD Hubs
4 or 8 O’clock position-
(end view)
8. Propshaft Yoke
(3 pumps max.)
10. Rear Concentric Housing
9. Swing Arm Bushings
DHF
Ill.
#
Item Lube Rec. Method Frequency*
5 All Wheel Drive
Hubs -- ATVs Polaris Demand
Drive Hub Fluid Remove filler hole screw in hubs. Rotate wheels to
4 or 8 O’clock position. If lubricant is not visible add
until it flows from filler hole. Reinstall screw. Semi-annually
¡
6 Ball Joint Polaris All Season
Grease
¢
Locate grease fitting on back side of struts and
grease with grease gun. Semi-annually
¡
7 Tie Rod Ends Polaris All Season
Grease
¢
Lift boot. Clean away dirt and grease. Apply fresh
grease by hand and reassemble. Semi-annually
¡
8 Propshaft Yoke Premium U-Joint
Grease Locate fittings and grease - 3 pumps maximum Annually ©
9 Swing Arm Bush-
ings Polaris All Season
Grease
¢
Locate grease fitting on swing arm and grease with
grease gun. Semi-annually
¡
10 Eccentric Housing Polaris All Season
Grease
¢
Locate grease fitting on eccentric housing and
grease with grease gun. Annually
©
* More often under severe use, such as operated in water or under severe loads.
¡
Semi-annually or 50 hours of operation (refer to Maintenance Schedule for additional information)
More often under severe conditions (operating in water or hauling heavy loads)
©
Annually or 100 hours of operation (refer to Maintenance Schedule for additional information)
More often under severe conditions (operating in water or hauling heavy loads)
¢
Grease conforming to NLGI No. 2, such as Polaris Premium All Season Grease, Conoco Superlube M or
Mobilegrease Special