Instr 9926584
Rev 03 2018-05
Page 3 of 3
5. Assemble and install LOCK & RIDE
®
expansion
anchor
w
to each corner of fixed rack
A
. Observe
location of nylon washer
D
and steel washer
E
.
6. Ensure all expansion anchors
w
are unlocked,
then install headache rack assembly
q
into bed
until anchors are fully seated. Depress levers to
lock in place.
If installation is loose, remove rack from bed,
tighten nut at base of affected anchor(s), and
reinstall.
FEEDBACK FORM
A feedback form has been created for the installer to provide any comments, questions
or concerns about the installation instructions. The form is viewable on mobile devices
by scanning the QR code or by clicking
if viewing on a PC.
FEEDBACK FORM
