Instr 9926584
Rev 03 2018-05
Page 2 of 3
REF
QTY
PART DESCRIPTION
PART NUMBER
3*
4
Screw, Shoulder - M8 X 1.25
-
4*
2
Washer - 8.4 X 16 X 1.5
-
1
Instructions
9926584
Items marked (*) are included in Hardware Kit PN 2206118.
TOOLS REQUIRED
• Safety Glasses
• Screwdriver, Phillips
• Socket Set, Hex Bit, Metric
• Wrench Set, Metric
IMPORTANT
Your HEADACHE RACK KIT is exclusively designed for your vehicle. Please read the installation instructions
thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to
ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
INSTALLATION INSTRUCTIONS
1. Shift vehicle transmission into “PARK”. Turn
ignition switch to “OFF” position and remove key.
2. Install shoulder screw
e
and washer
r
to fixed
rack
A
. Tighten screw. Repeat for RH side.
NOTE
Shoulder screw functions as strap retention post.
3. Raise moveable rack
B
, then secure two straps
C
to shoulder screws
e
installed in previous step.
4. Install shoulder screw
e
to fixed rack
A
. Tighten
screw. Repeat for RH side.
NOTE
Washers are not used at these locations.
